航天铝合金深腔零件整体成形预制坯优化设计

提出航天铝合金深腔零件整体成形方法,开展预制坯优化设计。对比分析直筒和变径筒两种预制筒坯结构变形规律,数值模拟研究了底部圆角对开口球形件液压成形的影响规律。以直径D=450 mm的球形整体零件为验证对象,进行底部圆角r=60 mm的变径筒形件的液压成形试验验证。结果表明:直筒坯液压成形时,赤道位置发生破裂;变径筒坯液压成形时,当胀形压力为16 MPa即发生贴模;液压成形时,筒端口自适应补料,所以上半球的壁厚分布均匀;随着底部圆角越大,筒底部减薄越小,筒壁厚越均匀;当底部圆角为r=60 mm时,开口球壳赤道位置壁厚减薄最严重,减薄率为11.1%,球底部减薄率为9.8%,开口球壳上半球壁厚差为0.17 mm,下半球壁厚差为0.43 mm。     

超视距机载武器双向数据链通信方法研究

通过分析超视距机载武器双向数据链的通信机制和工作原理,提出了一种建立数据链通信的方法。针对机载武器数据链通信中因高度误差而可能造成的波束指向误差,提出了一种初始通信波束指向保持方法,建立了相应的误差分配及波束指向模型。通过仿真计算,对该方法的正确性和有效性进行了验证,并对数据链通信时载机火控弹道解算模型的精度提出了指标要求,使数据链的应用工况得到了进一步拓展。     

首颗自主地月转移微卫星“龙江二号”

本文对世界首颗独立完成地月转移、近月制动、环月飞行的微卫星“龙江二号”进行了介绍。首先阐述了龙江二号的任务目标和总体方案；然后重点分析了轨道设计与控制、复杂电磁干扰的标定与抑制、宽视场三维基线干涉测量等关键技术难点；接着回顾了任务的实施过程；最后详细介绍了低频射电探测仪、沙特光学相机和VHF/UHF通信模块与学生微型CMOS相机等有效载荷，并展示了上述载荷获取的初步成果。     

飞机V型外倾双垂尾载荷校准技术

根据垂尾载荷校准及建模需求,对飞机V型外倾双垂尾结构受载情况进行了分析和简化,确定了校准试验载荷,研制了垂尾载荷校准试验专用龙门梁架。采用液压协调加载技术,完成了外倾双垂尾载荷校准试验,建立了满足测载要求的载荷模型。此种方法充分利用了左右垂尾外倾、双垂尾之间空间较大的特点,对左右垂尾对称施加向外的单点、多点载荷,加载载荷侧向分量左右自平衡,垂向分量依靠飞机自身重量即可平衡,飞机不需要复杂的固定与约束。试验中采用先搭建龙门框架,再停放飞机的方法,降低了试验风险、加快了试验进度,取得了良好的试验结果,对其他此类结构的载荷校准具有一定的借鉴作用。     

Adaptive suppression of passive intermodulation in digital satellite transceivers

For the performance issues of satellite transceivers suffering passive intermodulation interference,a novel and effective digital suppression algorithm is presented in this paper.In con trast to analog approaches,digital passive intermodulation (PIM) suppression approaches can be easily reconfigured and therefore are highly attractive for future satellite communication systems.A simplified model of nonlinear distortion from passive microwave devices is established in consid eration of the memory effect.The multiple high-order PIM products falling into the receiving band can be described as a bilinear predictor function.A suppression algorithm based on a bilinear poly nomial decorrelated adaptive filter is proposed for baseband digital signal processing.In consideration of the time-varying characteristics of passive intermodulation,this algorithm can achieve the rapidness of online interference estimation and low complexity with less consumption of resources.Numerical simulation results show that the algorithm can effectively compensate the passive intermodulation interference,and achieve a high signal-to-interference ratio gain.     

Air route network optimization in fragmented airspace based on cellular automata

Air route network optimization,one of the essential parts of the airspace planning,is an effective way to optimize airspace resources,increase airspace capacity,and alleviate air traffic con gestion.However,little has been done on the optimization of air route network in the fragmented airspace caused by prohibited,restricted,and dangerous areas (PRDs).In this paper,an air route network optimization model is developed with the total operational cost as the objective function while airspace restriction,air route network capacity,and non-straight-line factors (NSLF) are taken as major constraints.A square grid cellular space,Moore neighbors,a fixed boundary,together with a set of rules for solving the route network optimization model are designed based on cellular automata.The empirical traffic of airports with the largest traffic volume in each of the 9 flight information regions in mainland China is collected as the origin-destination (OD) air port pair demands.Based on traffic patterns,the model generates 35 air routes which successfully avoids 144 PRDs.Compared with the current air route network structure,the number of nodes decreases by 41.67％,while the total length of flight segments and air routes drop by 32.03％ and 5.82％ respectively.The NSLF decreases by 5.82％ with changes in the total length of the air route network.More importantly,the total operational cost of the whole network decreases by 6.22％.The computational results show the potential benefits of the model and the advantage of the algorithm.Optimization of air route network can significantly reduce operational cost while ensuring operation safety.     

几种生长模型参数的最小二乘估计方法及应用

提出一种Logistic模型、Gompertz模型、Mitscherlich模型和Bertallanffy模型的分布参数估计方法，这种方法以加权最小二乘法为基础，推导求解分布参数的方程组。利用这类曲线模型中参数形式的特点，使同时求解三个参数的问题简化为同时求解两个参数的问题，并给出求解参数耦合方程组的二重二分迭代法。预测地基沉降的计算实例表明，这种方法对于迭代初值的选取要求较低、求解速度快、精度高，而且通过选取权因子可以对已有数据实现“重近轻远”的处理。     

人民币汇率制度选择文献综述

人民币汇率制度选择问题一直是我国进行人民币制度建设的核心问题,其关乎着我国货币的主权和金融经济的独立和稳定,更关乎着我国内外经济的均衡和经济的增长。关于人民币汇率制度选择这一命题,国内外学者作了大量的研究,对这些学者的研究成果进行梳理,有助于我们更好地研究人民币汇率制度选择问题,从而整体把握人民币汇率制度。     

QAR数据在航空发动机监控中的应用研究

QAR设备虽已在民航界广泛应用，但目前对QAR数据的应用有限，浪费了大量数据信息。对此，提出通过采用多种监控逻辑并存的方法，建立监控体系，解决QAR数据的监控问题、3种监控逻辑被用于该体系：双发差异监控，EHM方法数据监控，数据极限监控。这些逻辑各有利弊，互为补充。通过对实际发动机QAR数据的监控测试．证明运用该方法所建立QAR数据监控体系的可行性和有效性，一定程度上解决了QAR数据监控问题。     

Numerical Simulation of Rotor Flow Field Based on Overset Grids and Several Spatial and Temporal Discretization Schemes

A numerical method based on solutions of Euler/Navier-Stokes (N-S) equations is developed for calculating the flow field over a rotor in hover. Jameson central scheme, van Leer flux-vector splitting scheme, advection upwind splitting method (AUSM) scheme, upwind AUSM/van Leer scheme, AUSM+ scheme and AUSMDV scheme are implemented for spatial discretization, and van Albada limiter is also applied. For temporal discretization, both explicit Runge-Kutta method and implicit lower-upper symmetric Gauss-Seidel (LU-SGS) method are attempted. Simultaneously, overset grid technique is adopted. In detail, hole-map method is utilized to identify intergrid boundary points (IGBPs). Furthermore, aimed at identification issue of donor elements, inverse-map method is implemented. Eventually, blade surface pressure distributions derived from numerical simulation are validated compared with experimental data, showing that all the schemes mentioned above have the capability to predict the rotor flow field accurately. At the same time, vorticity contours are illustrated for analysis, and other characteristics are also analyzed.